Straight male stud coupling, NPT 1/4"-8 S (M16x1,5), zinc-plated steel, no nut/ring

Once installed, the male stud coupling takes a tube into a device or a manifold through a tapered NPT thread. Material zinc-plated steel, no nut/ring is listed for this version. The data sheet gives a working pressure of 630 bar. Also stated are the NPT 1/4" male stud thread and the heavy series.

Benefits

• Tapered NPT male stud thread NPT 1/4" for tube 8 S (M16x1.5).
• Working pressure up to 630 bar as per the data sheet.
• Temperature range -40 to +120 °C for material zinc-plated steel, no nut/ring.
• Built in the heavy series with a cutting ring and a union nut.
• The joint can be released and remade without replacing the tube.

Applications

In hydraulics a line of 8 S (M16x1.5) ends at a pump or a valve block through NPT 1/4" and withstands 630 bar.