Straight stud coupling, M 33x2 - tube 25 S, zinc-plated steel, without nut and cutting ring

Once installed, the male stud coupling connects a precision tube through a cutting ring to a metric male stud thread. Material zinc-plated steel is listed for this version. The article is listed with a working pressure of 400 bar. Also stated are scope of delivery without nut and cutting ring.

Benefits

• Male stud thread M 33x2 with an elastomer seal, so the stud end seals without any additional material.
• For tube 25 S (M36x2), heavy series.
• Working pressure up to 400 bar.
• Temperature range -35 to +100 °C with the elastomer seal.
• Body made of zinc-plated steel for use on hydraulic lines.

Applications

At cylinder and pump ports the coupling of the heavy series is used, its elastomer seal sealing the stud end.

Standards and conformity

The coupling follows the cutting ring system for tubes to DIN 2391. The tube is cut off square, deburred and cleaned, and thread and cone are oiled before assembly.