Straight stud coupling, M 26x1.5 - tube 22 L, zinc-plated steel, without nut and cutting ring

As a male stud coupling the article connects a precision tube through a cutting ring to a metric male stud thread. The article is listed with a working pressure of 160 bar. This version is listed with male stud thread M 26x1.5 and tube connection 22 L (M30x2). Material zinc-plated steel is listed for this version. Also stated are scope of delivery without nut and cutting ring.

Benefits

• Male stud thread M 26x1,5 with an elastomer seal, so the stud end seals without any additional material.
• For tube 22 L (M30x2), light series.
• Working pressure up to 160 bar.
• Temperature range -35 to +100 °C with the elastomer seal.
• Body made of zinc-plated steel for use on hydraulic lines.

Applications

At cylinder and pump ports the coupling of the light series is used, its elastomer seal sealing the stud end.

Standards and conformity

The coupling follows the cutting ring system for tubes to DIN 2391. The tube is cut off square, deburred and cleaned, and thread and cone are oiled before assembly.