Straight stud coupling, M 22x1.5 - tube 16 S, zinc-plated steel, without nut and cutting ring

As a male stud coupling the article connects a precision tube through a cutting ring to a metric male stud thread. The data sheet gives a working pressure of 400 bar. The stated figures are male stud thread M 22x1.5 and tube connection 16 S (M24x1.5). Also stated are scope of delivery without nut and cutting ring.

Benefits

• Male stud thread M 22x1,5 with an elastomer seal, so the stud end seals without any additional material.
• For tube 16 S (M24x1,5), heavy series.
• Working pressure up to 400 bar.
• Temperature range -35 to +100 °C with the elastomer seal.
• Body made of zinc-plated steel for use on hydraulic lines.

Applications

In hydraulics the coupling takes tube 16 S (M24x1,5) to a device with an M 22x1,5 thread and holds 400 bar.

Standards and conformity

The coupling follows the cutting ring system for tubes to DIN 2391. The tube is cut off square, deburred and cleaned, and thread and cone are oiled before assembly.