Straight stud coupling, M 16x1.5 - tube 10 S, zinc-plated steel, without nut and cutting ring

Once installed, the male stud coupling connects a precision tube through a cutting ring to a metric male stud thread. The data also state a tube connection 10 S (M18x1.5). The stated figure is a working pressure of 630 bar. In addition the data give scope of delivery without nut and cutting ring.

Benefits

• Male stud thread M 16x1,5 with an elastomer seal, so the stud end seals without any additional material.
• For tube 10 S (M18x1,5), heavy series.
• Working pressure up to 630 bar.
• Temperature range -35 to +100 °C with the elastomer seal.
• Body made of zinc-plated steel for use on hydraulic lines.

Applications

At cylinder and pump ports the coupling of the heavy series is used, its elastomer seal sealing the stud end.

Standards and conformity

For tube 10 S (M18x1,5) the usual cutting ring procedure applies, and thin-walled tubes need a reinforcing sleeve.