Straight stud coupling, M 14x1.5 - tube 8 S, stainless steel 1.4571, NC clamping ring

Once installed, the male stud coupling connects a precision tube through a cutting ring to a metric male stud thread. Material stainless steel 1.4571 is listed for this version. The data state a working pressure of 500 bar. Also stated are clamping system NC clamping ring.

Benefits

• Male stud thread M 14x1,5 with an elastomer seal, so the stud end seals without any additional material.
• For tube 8 S (M16x1,5), heavy series.
• Working pressure up to 500 bar.
• Temperature range -20 to +200 °C with the elastomer seal.
• Body made of stainless steel 1.4571 for use on hydraulic lines.
• Built with an NC clamping ring.

Applications

In plant construction the version in stainless steel 1.4571 connects tube 8 S (M16x1,5) to the device without hemp or adhesive.

Standards and conformity

The coupling follows the cutting ring system for tubes to DIN 2391. The tube is cut off square, deburred and cleaned, and thread and cone are oiled before assembly.