Straight stud coupling, M 14x1.5 - tube 10 L, stainless steel 1.4571, without nut and cutting ring

The male stud coupling connects a precision tube through a cutting ring to a metric male stud thread. The article is listed with a working pressure of 315 bar. The stated figures are male stud thread M 14x1.5 and tube connection 10 L (M16x1.5). This version is supplied with scope of delivery without nut and cutting ring.

Benefits

• Male stud thread M 14x1,5 with an elastomer seal, so the stud end seals without any additional material.
• For tube 10 L (M16x1,5), light series.
• Working pressure up to 315 bar.
• Temperature range -20 to +200 °C with the elastomer seal.
• Body made of stainless steel 1.4571 for use on hydraulic lines.

Applications

At cylinder and pump ports the coupling of the light series is used, its elastomer seal sealing the stud end.

Standards and conformity

The coupling follows the cutting ring system for tubes to DIN 2391. The tube is cut off square, deburred and cleaned, and thread and cone are oiled before assembly.