Images are examples, some edited with AI. The technical data are authoritative. AI notice
Straight stud coupling, M 10x1 - tube 6 L, stainless steel 1.4571, without nut and cutting ring
In service the male stud coupling connects a precision tube through a cutting ring to a metric male stud thread. The decisive figure is a working pressure of 315 bar. Material stainless steel 1.4571, size M 10x1, tube 6 L (M12x1.5), without nut and cutting ring.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
This male stud coupling connects a precision tube through a cutting ring to a metric male stud thread. The data sheet gives a working pressure of 315 bar. The stated material is stainless steel 1.4571. This version is supplied with scope of delivery without nut and cutting ring.
Benefits
- Male stud thread M 10x1 with an elastomer seal, so the stud end seals without any additional material.
- For tube 6 L (M12x1,5), light series.
- Working pressure up to 315 bar.
- Temperature range -20 to +200 °C with the elastomer seal.
- Body made of stainless steel 1.4571 for use on hydraulic lines.
Applications
In hydraulics the coupling takes tube 6 L (M12x1,5) to a device with an M 10x1 thread and holds 315 bar.
Standards and conformity
The coupling follows the cutting ring system for tubes to DIN 2391. The tube is cut off square, deburred and cleaned, and thread and cone are oiled before assembly.
Technical data
| Material designation | 1.4571, without nut and cutting ring |
|---|---|
| Series | light series |
| Tube diameter outside | 6 L (M12x1.5) |
| Male stud thread | M 10x1 |
| Working pressure [bar] | 315 |
| Temperature range [°C] | -20 to +200 |
| Scope of delivery | without nut and cutting ring |
| Body material | stainless steel 1.4571 |
| Weight | 0.015 kg |
| Manufacturer | Fluidics equipment |
| Hersteller-Nr | XGE 6 LM ES ED |
| EAN | 4050571909246 |
| Zolltarifnummer | 73072910 |
| GPSR Herstellerdaten | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | ohne Mutter & Schneidring, 1.4571 |
| Einschraubgewinde | M 10x1 |
| Rohrdurchmesser (außen) | 6 L (M12x1,5) |
| Norm | DIN 2391 |
| Temperaturbereich | -20-200 °C |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.