Male stud coupling, straight, G 1/2", tube 16 S, zinc-plated steel, without nut and cutting ring

Once installed, the male stud coupling connects a tube to a male stud thread through a cutting ring and a union nut. In addition the sheet lists a temperature range of -35 to +100 °C. The stated figure is a working pressure of 400 bar.

Benefits

• Working pressure 400 bar in the heavy series design.
• Male stud thread G 1/2" at the housing, tube connection 16 S (M24x1.5).
• Body in zinc-plated steel, supplied without union nut and cutting ring.
• Elastomer seal on the stud, temperature range -35 to +100 °C.
• The seal is made of NBR on zinc-plated steel and of FKM on 1.4571.

Applications

On power units and cylinders the heavy series takes the step from the 16 S (M24x1.5) tube to the housing, with the elastomer seal sealing the thread.