Compression fitting, straight design, thread G 3/8", tube 10 (M16x1.5) mm, brass, -20 bis +80 °C

This compression fitting is designed for the male thread G 3/8" and a tube of 10 (M16x1.5) mm outside diameter. The part presses the clamping ring onto the tube as the union nut is tightened. The operating pressure reaches up to 95 bar with hard copper tube. The straight design carries the medium through the part without deflection.

Benefits

• With tube diameter 10 (M16x1.5) mm the size is fixed, so no reworking of the line is required
• The operating pressure up to 95 bar with hard copper tube is released for this size
• The temperature range from -20 °C to +80 °C covers cold installation and warm machine surroundings
• Brass as material covers the released range from -20 °C to +80 °C
• The seals in PA are matched to the medium

Applications

Copper pipework in plants and buildings, lubrication and cooling lines on machine tools, measuring lines and pressure gauge connections, maintenance of existing pipework.

Standards and conformity

The brass compression fittings cannot be combined with cutting ring tube fittings to ISO 8434-1, formerly DIN 2353.