Carriage bolt DIN 603 with square neck, M 5x45, stainless steel A2 (without nut)

The carriage bolt joins two parts with a flat head that hardly protrudes and locks itself against turning through the square neck and follows DIN 603. This version comes with thread M 5 and length 45 mm. It is complemented by a head height of 3.3 mm.

Benefits

• Thread M 5 at a length of 45 mm, the thread length is 16 mm.
• Flat head 13 mm across and only 3.3 mm high, so the bearing area stays large and the head hardly protrudes.
• Square 5 mm under the head, it engages in the hole and holds the bolt while it is tightened.
• The matching hexagon nut has a width across flats of 8 mm to DIN and 8 mm to ISO 8677.
• Made of stainless steel A2 (without nut) to DIN 603.

Applications

In timber and steel construction the M 5x45 bolt pulls the plate against the timber and the flat head stays almost flush.

Standards and conformity

Dimensions and design follow DIN 603, the matching hexagon nut complies with ISO 8677.