Images are examples, some edited with AI. The technical data are authoritative. AI notice
Carriage bolt DIN 603 with square neck, M 5x25, stainless steel A2 (without nut)
This carriage bolt joins two parts with a flat head that hardly protrudes and locks itself against turning through the square neck. A key figure is a head diameter of 13 mm. Size thread M 5, length 25 mm, material stainless steel A2 (without nut).
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
As a carriage bolt the article joins two parts with a flat head that hardly protrudes and locks itself against turning through the square neck. The data state a head diameter of 13 mm. This version is listed with thread M 5 and length 25 mm. Material stainless steel A2 (without nut) is listed for this version.
Benefits
- Thread M 5 at a length of 25 mm, the thread length is up to approximately the head.
- Flat head 13 mm across and only 3.3 mm high, so the bearing area stays large and the head hardly protrudes.
- Square 5 mm under the head, it engages in the hole and holds the bolt while it is tightened.
- The matching hexagon nut has a width across flats of 8 mm to DIN and 8 mm to ISO 8677.
- Made of stainless steel A2 (without nut) to DIN 603.
Applications
On a joint that is accessible from one side only, the 5 mm square holds the bolt while the nut is tightened.
Standards and conformity
Dimensions and design follow DIN 603, the matching hexagon nut complies with ISO 8677.
Technical data
| Material | stainless steel A2 (without nut) |
|---|---|
| Thread D | M 5 |
| Length L [mm] | 25 |
| Thread length B [mm] | up to approximately the head |
| Head diameter Dk [mm] | 13 |
| Dimension F [mm] | 4 |
| Head height K [mm] | 3.3 |
| Width across flats, nut DIN [mm] | 8 |
| Width across flats, nut ISO [mm] | 8 |
| Square V [mm] | 5 |
| Weight | 0.005000 |
| Manufacturer | Fluidics equipment |
| Hersteller-Nr | 603-M5X25 ES |
| EAN | 4050571034450 |
| Zolltarifnummer | 73181900 |
| GPSR Herstellerdaten | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Edelstahl A2 (ohne Mutter) |
| Norm | DIN 603, DIN EN ISO 8677 |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day. Ask a question