Images are examples, some edited with AI. The technical data are authoritative. AI notice
Carriage bolt DIN 603 with square neck, M 5x16, stainless steel A2 (without nut)
In service the carriage bolt joins two parts with a flat head that hardly protrudes and locks itself against turning through the square neck. The decisive figure is a head diameter of 13 mm. Dimensions thread M 5, length 16 mm, made of stainless steel A2 (without nut).
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
This carriage bolt joins two parts with a flat head that hardly protrudes and locks itself against turning through the square neck. The data sheet gives a head diameter of 13 mm. The stated material is stainless steel A2 (without nut).
Benefits
- Thread M 5 at a length of 16 mm, the thread length is up to approximately the head.
- Flat head 13 mm across and only 3.3 mm high, so the bearing area stays large and the head hardly protrudes.
- Square 5 mm under the head, it engages in the hole and holds the bolt while it is tightened.
- The matching hexagon nut has a width across flats of 8 mm to DIN and 8 mm to ISO 8677.
- Made of stainless steel A2 (without nut) to DIN 603.
Applications
In timber and steel construction the M 5x16 bolt pulls the plate against the timber and the flat head stays almost flush.
Standards and conformity
Dimensions and design follow DIN 603, the matching hexagon nut complies with ISO 8677.
Technical data
| Material | stainless steel A2 (without nut) |
|---|---|
| Thread D | M 5 |
| Length L [mm] | 16 |
| Thread length B [mm] | up to approximately the head |
| Head diameter Dk [mm] | 13 |
| Dimension F [mm] | 4 |
| Head height K [mm] | 3.3 |
| Width across flats, nut DIN [mm] | 8 |
| Width across flats, nut ISO [mm] | 8 |
| Square V [mm] | 5 |
| Weight | 0.004400 |
| Manufacturer | Fluidics equipment |
| Hersteller-Nr | 603-M5X16 ES |
| EAN | 4050571034436 |
| Zolltarifnummer | 73181900 |
| GPSR Herstellerdaten | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Edelstahl A2 (ohne Mutter) |
| Norm | DIN 603, DIN EN ISO 8677 |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day. Ask a question