Carriage bolt DIN 603 with square neck, M 10x45, zinc-plated steel 3.6 / 4.6

This carriage bolt to DIN 603 joins two parts with a flat head that hardly protrudes and locks itself against turning through the square neck. The data sheet gives a head diameter of 24 mm. The stated material is zinc-plated steel 3.6 / 4.6.

Benefits

• Thread M 10 at a length of 45 mm, the thread length is 26 mm.
• Flat head 24 mm across and only 5.0 mm high, so the bearing area stays large and the head hardly protrudes.
• Square 10 mm under the head, it engages in the hole and holds the bolt while it is tightened.
• The matching hexagon nut has a width across flats of 17 mm to DIN and 16 mm to ISO 8677.
• Made of zinc-plated steel 3.6 / 4.6 to DIN 603.

Applications

In timber and steel construction the M 10x45 bolt pulls the plate against the timber and the flat head stays almost flush.

Standards and conformity

Dimensions and design follow DIN 603, the matching hexagon nut complies with ISO 8677.