Images are examples, some edited with AI. The technical data are authoritative. AI notice
Carriage bolt DIN 603 with square neck, M 10x35, stainless steel A2 (without nut)
The carriage bolt joins two parts with a flat head that hardly protrudes and locks itself against turning through the square neck. The underlying rating is a head diameter of 24 mm. Thread M 10, length 35 mm in stainless steel A2 (without nut).
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
Once installed, the carriage bolt joins two parts with a flat head that hardly protrudes and locks itself against turning through the square neck. The data also state a head height of 5.0 mm. The stated figure is a head diameter of 24 mm.
Benefits
- Thread M 10 at a length of 35 mm, the thread length is up to approximately the head.
- Flat head 24 mm across and only 5.0 mm high, so the bearing area stays large and the head hardly protrudes.
- Square 10 mm under the head, it engages in the hole and holds the bolt while it is tightened.
- The matching hexagon nut has a width across flats of 17 mm to DIN and 16 mm to ISO 8677.
- Made of stainless steel A2 (without nut) to DIN 603.
Applications
On railings and fences the head in stainless steel A2 (without nut) stays smooth, so there is no edge to catch on.
Standards and conformity
The widths across flats to DIN and to ISO 8677 are given separately because they can differ from M 10 upwards.
Technical data
| Material | stainless steel A2 (without nut) |
|---|---|
| Thread D | M 10 |
| Length L [mm] | 35 |
| Thread length B [mm] | up to approximately the head |
| Head diameter Dk [mm] | 24 |
| Dimension F [mm] | 6 |
| Head height K [mm] | 5.0 |
| Width across flats, nut DIN [mm] | 17 |
| Width across flats, nut ISO [mm] | 16 |
| Square V [mm] | 10 |
| Weight | 0.031000 |
| Manufacturer | Fluidics equipment |
| Hersteller-Nr | 603-M10X35 ES |
| EAN | 4050571034771 |
| Zolltarifnummer | 73181900 |
| GPSR Herstellerdaten | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Edelstahl A2 (ohne Mutter) |
| Norm | DIN 603, DIN EN ISO 8677 |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day. Ask a question