Images are for illustration purposes only and may differ from the actual product. Some images have been generated or edited, in whole or in part, using artificial intelligence systems. The technical specifications in the product description are authoritative.
In service the carriage bolt joins two parts with a flat head that hardly protrudes and locks itself against turning through the square neck. The decisive figure is a head diameter of 24 mm. Dimensions thread M 10, length 30 mm, made of stainless steel A2 (without nut).
Carriage bolt DIN 603 with square neck, M 10x30, stainless steel A2 (without nut)
FLUIDICS EQUIPMENT
Original product
Net price (excl. VAT)
€2.59
Item
FL-245019
Manufacturer no.
603-M10X30 ES
Personal expert advice
Brand new
Specialist dealer since 2009
Original product
Worldwide shipping
Product data
Manufacturer no.603-M10X30 ES
EAN4050571034764
Customs tariff number73181900
ConditionNew
Artikel
FL-245019
This carriage bolt to DIN 603 joins two parts with a flat head that hardly protrudes and locks itself against turning through the square neck. The stated material is stainless steel A2 (without nut). The data sheet gives a head diameter of 24 mm.
Benefits
- Thread M 10 at a length of 30 mm, the thread length is up to approximately the head.
- Flat head 24 mm across and only 5.0 mm high, so the bearing area stays large and the head hardly protrudes.
- Square 10 mm under the head, it engages in the hole and holds the bolt while it is tightened.
- The matching hexagon nut has a width across flats of 17 mm to DIN and 16 mm to ISO 8677.
- Made of stainless steel A2 (without nut) to DIN 603.
Technical data
| Material | stainless steel A2 (without nut) |
|---|---|
| Thread D | M 10 |
| Length L [mm] | 30 |
| Thread length B [mm] | up to approximately the head |
| Head diameter Dk [mm] | 24 |
| Dimension F [mm] | 6 |
| Head height K [mm] | 5.0 |
| Width across flats, nut DIN [mm] | 17 |
| Width across flats, nut ISO [mm] | 16 |
| Square V [mm] | 10 |
Applications
In timber and steel construction the M 10x30 bolt pulls the plate against the timber and the flat head stays almost flush.
Standards and conformity
Dimensions and design follow DIN 603, the matching hexagon nut complies with ISO 8677.
| Weight | 0.028000 |
|---|---|
| Manufacturer | Fluidics equipment |
| Hersteller-Nr | 603-M10X30 ES |
| EAN | 4050571034764 |
| Zolltarifnummer | 73181900 |
| GPSR Herstellerdaten | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Edelstahl A2 (ohne Mutter) |
| Norm | DIN 603, DIN EN ISO 8677 |