Rodless short cylinder Ø 63 mm, stroke 1000 mm, G 3/8, short design, magnetic piston - Fluidics equipment

1000 mm stroke at 63 mm piston diameter, taken off directly at the yoke above the tube slot: this short-design rodless cylinder works up to 8 bar.

Benefits

• Up to 42% shorter than the standard series, space-saving even compared with short-stroke cylinders with piston rod
• Adjustable cushioning at both ends with 49 mm cushioning length
• Compressed air port G 3/8 on both sides, convertible to one side or underneath by moving the sealing plugs
• Magnetic piston for end-position sensing with cylinder switches
• Tube, cylinder heads and driver in anodised aluminium, stainless steel cover band, NBR/PUR seals

Applications

Installation: any position is possible, preferably with the yoke facing down to avoid contamination. Compressed air is supplied via G 3/8. At 1000 mm stroke the short design saves space where even a short-stroke cylinder with piston rod would be too long.