Push-button safety coupling NW 7.2 with female thread G 3/8, antistatic plastic - Fluidics equipment

More safety at the workplace: the push-button safety coupling with female thread G 3/8 holds the plug on disconnection until the plug side is vented. Rated for 0 to 12 bar and 1500 l/min.

Benefits at a glance

• Positionable coupling head, the push button can be turned to an ergonomic position after screwing in
• Safety function controlled by residual pressure, release only below approx. 0.5 bar
• Antistatic body, ATEX suitable according to series data (no potential ignition source), for paint booths and gas atmospheres
• Plastic body does not scratch surfaces, silicone-free production
• Operating pressure 0 to 12 bar, flow rate 1500 l/min
• Body material: conductive composite and nickel-plated brass, NBR seal
• Compatible with common NW 7.2 plugs (incl. Rectus 25/26, CEJN 320, Festo KS4)

Typical use

Typical places of use are paint booths, areas with gas atmosphere and grain transfer. The conductive plastic body is no potential ignition source and leaves no scratches.

For the push-button safety coupling with G 3/8 female, NW 7.2 plugs in hardened steel are the right choice.