Push-button safety coupling NW 7.2 with female thread G 1/2, antistatic plastic - Fluidics equipment

The push-button safety coupling NW 7.2 with female thread G 1/2 separates compressed air lines without whiplash. Operating pressure 0 to 12 bar, flow rate 1500 l/min.

Why it pays off

• Positionable coupling head, the push button can be turned to an ergonomic position after screwing in
• Safety function controlled by residual pressure, release only below approx. 0.5 bar
• Antistatic body, ATEX suitable according to series data (no potential ignition source), for paint booths and gas atmospheres
• Plastic body does not scratch surfaces, silicone-free production
• Operating pressure 0 to 12 bar, flow rate 1500 l/min
• Body material: conductive composite and nickel-plated brass, NBR seal
• Compatible with common NW 7.2 plugs (incl. Rectus 25/26, CEJN 320, Festo KS4)

Typical use

Typical places of use are paint booths, areas with gas atmosphere and grain transfer. The conductive plastic body is no potential ignition source and leaves no scratches.

NW 7.2 coupling plugs in hardened steel are recommended as counterpart for the G 1/2 female version.