Flat-face coupling ISO 16028, male, G 3/8" female thread, size 2, 250 bar, material 1.4401

Where hydraulic hoses with a G 3/8" female thread in size 2 are disconnected and rejoined in the field, a sealing face that can be wiped clean matters. This male half to ISO 16028 delivers that at 250 bar.

Advantages

• Connecting and disconnecting works with one hand, also at the 10 mm nominal bore of this size.
• Material 1.4401 with a 1.4462 spring, an FKM seal and a PTFE support ring covers a temperature range of -20 to +205 °C.
• A working pressure of 250 bar and a nominal bore of 10 mm belong to size 2 to ISO 16028.
• The flat coupling face to ISO 16028 can be wiped clean before connecting, so no dirt enters the hydraulic system.
• The design absorbs axial forces, which suits hydraulic hose lines with a G 3/8" female thread.

Technical data

Applications

Suitable for hydraulic hoses with a G 3/8" female thread in systems up to 250 bar. Between -20 °C and +205 °C the joint stays within its intended temperature window.

Standards and compatibility

The coupling half is built to ISO 16028 in size 2 with a nominal bore of 10 mm and mates with counterparts of the same size to that standard. Dimension B measures 32 mm.