Flat-face coupling ISO 16028, male, G 1/2" female thread, size 3, 400 bar, zinc-plated steel

For hydraulic hoses with a G 1/2" female thread, this size 3 male half offers a nominal bore of 12.5 mm to ISO 16028 and a working pressure of 400 bar.

Advantages

• Connecting and disconnecting works with one hand, also at the 12.5 mm nominal bore of this size.
• Zinc-plated steel with an NBR seal covers a temperature range of -30 to +100 °C.
• A working pressure of 400 bar and a nominal bore of 12.5 mm belong to size 3 to ISO 16028.
• The flat coupling face to ISO 16028 can be wiped clean before connecting, so no dirt enters the hydraulic system.
• The design absorbs axial forces, which suits hydraulic hose lines with a G 1/2" female thread.

Applications

Suitable for hydraulic hoses with a G 1/2" female thread in systems up to 400 bar. Between -30 °C and +100 °C the joint stays within its intended temperature window.

Standards and compatibility

Built to ISO 16028 in size 3. Counterparts of the same size to that standard suit the G 1/2" female thread and 400 bar. The manufacturer is CEJN.