Filter regulator SYNTESI, without gauge, size 1, without bushings, 0 to 4 bar, 20 µm, RMSA semi-automatic drain, type 5610B220 - Riegler 140741

The SYNTESI filter regulator 5610B220 comes without port bushings and regulates to 0 to 4 bar, filter rating 20 µm. The adjusting knob can be latched and locked so the set pressure on type 5610B220 cannot be changed by accident. Type 5610B220 uses a rolling diaphragm that combines precise control and high flow with low friction. The regulator compensates for inlet pressure fluctuations. On type 5610B220 the RMSA drain closes at approx. 1 bar and drains once the bowl is depressurised, it can also be locked manually. Type 5610B220 comes without a pressure gauge. Two G 1/8 auxiliary ports on the front and rear of type 5610B220 take a gauge or pressure switch or serve as an extra air outlet.

Strengths in operation

• 20 µm filter rating protects downstream pneumatics.
• Outlet pressure 0 to 4 bar adjustable, port 5610B220.
• Flow rate 3000 Nl/min as measured by the manufacturer.
• Inlet pressure up to 15 bar permitted.
• RMSA semi-automatic drain on the bowl of size 1.
• Temperature -10 to 50 °C for medium and ambient.

Typical use

Typically installed at a machine inlet or a workstation that needs filtered air at a fixed working pressure.