5/2-way solenoid valve, 5/2-way (impulse valve), G 1/8", 24 V DC, 660 l/min, 1.5 to 7 bar, 0.7 W

A double-acting actuator needs a valve that switches the air path reliably and delivers the required flow. This 5/2-way solenoid valve with connection G 1/8" passes 660 l/min and is controlled with 24 V DC. The switching function is 5/2-way (impulse valve). The actuator can therefore be switched straight from the machine control without an extra pilot stage.

Advantages

• Connection G 1/8" and exhaust G 1/8", so the piping follows the existing line network.
• Control voltage tolerance plus/minus 10 percent, which makes short supply dips uncritical.
• Media oiled and non-oiled, filtered compressed air, so no separate treatment is needed.
• Flow rate of 660 l/min, so the connected actuator moves without the valve throttling it.
• Switching function 5/2-way (impulse valve), so the rest position is clearly defined.

Applications

• Cycled feeding and clamping units in fixture building.
• Plants operated within the temperature range -5 to +50 °C.
• Replacement of a defective valve of the same type in existing machines.
• Control of double-acting cylinders with an air demand up to 660 l/min.