Spare parts set, dirt str., red brass, f. size 1/4,3/8,1/2, mw0.5 - Riegler 147767

Spare parts set for dirt strainers made of red brass, screen and seal, mesh width 0.5 mm, for connection size 1/4, 3/8, 1/2

Standards and origin

• Customs tariff number: 84813099
• Country of origin: DE

About Strainer and spare parts

Strainers hold particles back before they reach valves, pumps or meters. The group covers DN 8 to DN 100 with maximum operating pressures from 16 to 40 bar.

What matters when choosing

• Housing material follows the medium and the surroundings. Bright brass, nickel-plated brass and gunmetal are intended for water supply, heating, air conditioning and compressed air systems, while stainless steel 1.4401 / 1.4408 and CF8M suit installations that need more corrosion resistance.
• Nominal width and thread follow the pipework. DN 8 to DN 100 is available with threads from G 1/4 through G 1/2 and G 1 up to G 4, plus Rp 3/8.
• Maximum operating pressure runs from 16 to 40 bar depending on the version and has to match the design pressure of the pipe system.
• Sealing is available as an NBR O-ring, an FKM (FPM) O-ring or in PTFE. Medium and temperature decide which of them applies.
• Operating temperature starts between -25 °C and -10 °C and ends between 110 °C and 180 °C depending on type, with a maximum medium temperature of 180 °C.

Typical applications

• Protecting control valves, pumps and water meters in building services
• Heating and air conditioning circuits carrying rust and residues out of the pipework
• Compressed air systems upstream of sensitive valves and measuring points
• Cooling water circuits on machine tools and power units
• Stainless steel process lines where the housing has to match the pipe material

Threads are made to DIN EN ISO 228-1, some of them to tolerance class B. According to the manufacturer the brass-bodied versions are not suitable for steam.