Images are examples, some edited with AI. The technical data are authoritative. AI notice
Electric cylinder unit with ball screw, size 60, stroke 100 mm, lead 12 mm/rev, IO-Link EPCS-BS-60-100-12P-A-ST-M-H1-PLK-AA - Festo 8118297
The EPCS size 60 moves loads of up to 56 kg over a 100 mm stroke with ±0.02 mm repetition accuracy. Stepper motor, single-turn encoder and controller are built in and it connects via 2 digital inputs or IO-Link.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The EPCS-BS-60-100-12P-A-ST-M-H1-PLK-AA electric cylinder unit combines ball screw, stepper motor, absolute single-turn encoder and controller in one device. With a 100 mm stroke, up to 375 N feed force and up to 0.22 m/s, it is designed for precise infeed movements, including vertical installation.
Benefits
- Everything on board: motor, absolute encoder (16 bit) and controller, the EPCS-60 needs only 24 V DC and 5.3 A nominal current.
- Simple control: the EPCS-60 uses 2 digital inputs and 2 outputs (PNP or NPN) or IO-Link Device V 1.1, parameters can also be set on the unit itself.
- Repeatable: ±0.02 mm at up to 0.22 m/s and 5 m/s² acceleration.
- Load capacity: feed force up to 375 N, reference payload 56 kg horizontal and 18 kg vertical, spindle pitch 12 mm/rev.
- Cleanroom-suitable: the EPCS-60 meets Class 9 according to ISO 14644-1, degree of protection IP40, lifetime lubrication.
Applications
The piston rod with male thread M12x1,25 takes tools or grippers directly. The EPCS-60 operates at 0 to 50 °C ambient temperature. Above 30 °C the permissible power drops by 2 % per kelvin, which matters when the unit is installed close to control cabinets.
Technical data
| Size | 60 |
|---|---|
| Stroke | 100 mm |
| Stroke reserve | 0 mm |
| Piston rod thread | M12x1.25 |
| Reversing backlash theoretical | 100 µm |
| Spindle diameter | 12 mm |
| Spindle pitch | 12 mm/rev |
| Torsional backlash at piston rod +/- | 1° |
| Mounting position | Any |
| Piston-rod end | Male thread |
| Type of motor | Stepper motor |
| Design | With ball screw, With integrated drive |
| Spindle type | Ball screw |
| Protection against torque/guide | With plain-bearing guide |
| Referencing | Positive fixed stop block, Negative fixed stop block, Reference switch |
| Rotor position sensor | Absolute encoder, single turn |
| Rotor position sensor, encoder measuring principle | magnetic |
| Temperature monitoring | Switch-off for excessive temperature, Integrated precise CMOS temperature sensor with analogue output |
| Additional functions | Built-in end-position sensing |
| Display | LED |
| Ready status indication | LED |
| Maximum acceleration | 5 m/s² |
| Maximum speed | 0.22 m/s |
| Speed "Speed press" | 0.01 m/s |
| Repetition accuracy | ±0.02 mm |
| Features of digital logic outputs | Configurable, Not galvanically isolated |
| Duty cycle | 100% |
| Insulation protection class | B |
| Maximum current digital logic outputs | 100 mA |
| Maximum current consumption | 5300 mA |
| Maximum current consumption, logic | 0.3 A |
| Nominal voltage DC | 24 V |
| Nominal current | 5.3 A |
| Parameterisation interface | IO-Link, User interface |
| Rotor position transducer resolution | 16 bit |
| Permissible voltage fluctuations | +/- 15 % |
| Power supply, connection type | Plug |
| power supply, connection system | M12x1, T-coded according to EN 61076-2-111 |
| Power supply, number of pins/wires | 4 |
| Approval | RCM |
| KC mark | KC-EMV |
| CE mark (see declaration of conformity) | To EU EMC Directive, In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK RoHS instructions |
| Vibration resistance | Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class CRC | 0 - No corrosion stress |
| LABS (PWIS) conformity | VDMA24364 zone III |
| Cleanroom suitability, measured according to ISO 14644-14 | Class 9 according to ISO 14644-1 |
| Storage temperature | -20 to 60 °C |
| Relative air humidity | Non-condensing |
| Degree of protection | IP40 |
| Protection class | III |
| Ambient temperature | 0 to 50 °C |
| Note on ambient temperature | Power must be reduced by 2% per K at ambient temperatures above 30°C |
| Maximum moment Mx | 0 Nm |
| Maximum moment My | 6.4 Nm |
| Maximum moment Mz | 6.4 Nm |
| Maximum radial force at drive shaft | 230 N |
| Maximum feed force Fx | 375 N |
| Reference value effective load, horizontal | 56 kg |
| Reference value effective load, vertical | 18 kg |
| Maintenance interval | Lifetime lubrication |
| Moving mass for 0 mm stroke | 305 g |
| Additional moving mass per 10 mm stroke | 6.5 g |
| Product weight | 2984 g |
| Basic weight for 0 mm stroke | 2294 g |
| Additional weight per 10 mm stroke | 69 g |
| Number of digital logic outputs 24 V DC | 2 |
| Number of digital logic inputs | 2 |
| Specification logic input | Based on IEC 61131-2, type 1 |
| Working range of logic input | 24 V |
| Features of logic input | Configurable, Not galvanically isolated |
| IO-Link, SIO-Mode support | Yes |
| IO-Link, Protocol version | Device V 1.1 |
| IO-Link, communication mode | COM3 (230.4 kBaud) |
| IO-Link, Port class | A |
| IO-Link, Number of ports | 1 |
| IO-Link, Process data length OUT | 2 bytes |
| IO-Link, Process data content OUT | Move intermediate 1 bit |
| IO-Link, Process data length IN | 2 bytes |
| IO-Link, Process data content IN | State Device 1 bit, State In 1 bit, State Intermediate 1 bit, State Move 1 bit, State Out 1 bit |
| IO-Link, Service data IN | 32 bit Force, 32 bit position, 32 bit speed |
| IO-Link, Min, cycle time | 1 ms |
| IO-Link, Data storage required | 500 byte |
| Maximum cable length | 15 m outputs, 15 m inputs, 20 m with IO-Link operation |
| Switching logic for outputs | NPN (negative switching), PNP (positive switching) |
| Switching logic for inputs | NPN (negative switching), PNP (positive switching) |
| Logic interface, connection type | Plug |
| Logic interface, connection technology | M12x1, A-coded according to EN 61076-2-101 |
| Logic interface, number of pins/wires | 8 |
| Type of mounting | With female thread, With accessories |
| Note on materials | RoHS compliant |
| Material housing | Smooth-anodised wrought aluminium alloy |
| Material piston rod | High-alloy stainless steel |
| Material ball screw nut | Steel |
| Material spindle | Bearing steel |
| Weight | 3 kg |
| Manufacturer | Festo |
| Hersteller-Nr | EPCS-BS-60-100-12P-A-ST-M-H1-PLK-AA |
| EAN | 4052568466251 |
| Zolltarifnummer | 84798997 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Stroke [mm] | 100 |
| Operating voltage | 24 V DC |
| Protection rating | IP40 |
| Temperaturbereich | 0-50 °C |
| Temperature (max.) | 50 |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.







