Split Flow Hydraulic Manifold with Gauges and Frame - Enerpac SFM42

The SFM42 manifold splits the flow of a single hydraulic pump across up to four outlets, letting one operator control a maximum of four lifting points at once. Pressure-compensated flow control valves preset and limit the advance and retract speed of each cylinder, adding safety and precision when lifting and lowering.

Benefits

• One operator controls up to 4 lifting points from a single manifold
• Pressure gauge and flow control valve on every outlet for controlled lifting and lowering
• Regulates both advance and retract speed, so raising and lowering alike
• CR400 couplers pre-installed on every inlet and outlet port
• Several SFM manifolds can be connected in parallel for additional cylinders

Technical data

• Ports: 1 inlet, 4 outlets
• Max. cylinders: 4 double-acting
• Min. pump flow: 1.4 L/min (0.15 - 0.25 L/min per cylinder)
• Max. difference among outlets: 10% of the stroke (at 150 mm)
• Operating pressure: 700 bar
• Weight: 30 kg
• Series: SFM

Applications

An economical solution for basic simultaneous multi-point lifting where an evenly distributed load is raised and lowered under the control of a single operator.