Images are examples, some edited with AI. The technical data are authoritative. AI notice
Servo motor 680 V, 93.7 Nm standstill torque, multi-turn safety encoder, keyed shaft EMMT-AS-190-LKR-HT-R3MY - Festo 8148410
Servo motor EMMT-AS-190-LKR-HT-R3MY for 680 V DC link voltage with 93.7 Nm standstill torque and up to 183.3 Nm peak torque. A multi-turn safety encoder with EnDat 22 reports the rotor position at 19 bit. The safety encoder can be used up to SIL 3 and PL e.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
For positioning drives at 680 V, the servo motor EMMT-AS-190-LKR-HT-R3MY offers 82.4 Nm continuous nominal torque and peaks up to 183.3 Nm.
Benefits
- Reserve for acceleration: peak torque 183.3 Nm at 82.4 Nm nominal torque
- Multi-turn safety encoder: EnDat 22, 19 bit, 4096 revolutions absolute
- Connection: hybrid plug M40x1, 15 pins
- Degree of protection: IP21 at the shaft, IP67 for housing and connection components
- Functional safety: SIL 3 and PL e, category 3 (see user documentation)
- Bearing service life: 20000 h under nominal conditions
Applications
The motor suits linear and rotary axes with interface code 190B. Temperature class F to EN 60034-1 and rating class S1 permit continuous duty at 82.4 Nm.
Technical data
| Ambient temperature | -15 to 40 °C |
|---|---|
| Note on ambient temperature | Up to 80°C with derating of -1.5% per degree Celsius |
| Maximum installation height | 4000 m |
| Note on maximum installation height | As of 1,000 m: only with derating of -1.0% per 100 m |
| Storage temperature | -20 to 70 °C |
| Relative air humidity | 0 - 90% |
| Conforms to standard | IEC 60034 |
| Temperature class as per EN 60034-1 | F |
| Maximum winding temperature | 155 °C |
| Rating class as per EN 60034-1 | S1 |
| Temperature monitoring | Digital motor temperature transmission via EnDat 2.2 |
| Motor type to EN 60034-7 | IM V1, IM V3 |
| Mounting position | Any |
| Degree of protection | IP21 |
| Note on degree of protection | IP67 for motor housing including connection components |
| Concentricity, coaxiality, axial runout to DIN SPEC 42955 | N |
| Balance quality | G 2.5 |
| Detent torque | below 1.0% of peak torque |
| Bearing lifetime under nominal conditions | 20000 h |
| Featherkey shaft type | DIN 6885, A 10 x 8 x 45 |
| Interface code, motor out | 190B |
| Electrical connection 1, connection type | Hybrid plug |
| Electrical connection 1, connector system | M40x1 |
| Electrical connection 1, number of connections/cores | 15 |
| Pollution degree | 2 |
| Note on materials | RoHS compliant |
| Corrosion resistance class CRC | 0 - No corrosion stress |
| LABS (PWIS) conformity | VDMA24364 zone III |
| Vibration resistance | As per EN 60068-2-6 |
| Shock resistance | As per EN 60068-2-29, 15 g/11 ms to EN 60068-2-27 |
| Approval | RCM, c UL us - Recognised (Oil) |
| CE mark (see declaration of conformity) | To EU EMC Directive, To EU Low Voltage Directive, In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK RoHS instructions, To UK regulations for electrical equipment |
| Certificate issuing authority | TÜV 968/FSP 2317.01/25, UL E342973 |
| Nominal operating voltage DC | 680 V |
| Type of winding switch | Star inside |
| Number of pole pairs | 5 |
| Standstill torque | 93.7 Nm |
| Nominal torque | 82.4 Nm |
| Peak torque | 183.3 Nm |
| Nominal rotary speed | 1000 1/min |
| Maximum rotational speed | 1654 1/min |
| Maximum mechanical speed | 8000 1/min |
| Angular acceleration | 100000 rad/s² |
| Nominal power rating of motor | 8629 W |
| Continuous stall current | 22.8 A |
| Nominal motor current | 20 A |
| Peak current | 49.7 A |
| Motor constant | 4.12 Nm/A |
| Standstill torque constant | 4.79 Nm/A |
| Voltage constant, phase-to-phase | 289.7 mVmin |
| Phase-phase winding resistance | 0.358 Ohm |
| Phase-phase winding inductance | 13.8 mH |
| Winding longitudinal inductivity Ld (phase) | 6.95 mH |
| Winding cross inductivity Lq (phase) | 6.9 mH |
| Electric time constant | 38.8 ms |
| Thermal time constant | 80 min |
| Thermal resistance | 0.3 K/W |
| Measuring flange | 450 x 450 x 30 mm, steel |
| Total mass moment of inertia of output | 145 kgcm² |
| Product weight | 53000 g |
| Permissible axial shaft load | 520 N |
| Permissible radial shaft load | 2620 N |
| Rotor position sensor | Absolute multi-turn safety encoder |
| rotor position sensor, manufacturer designation | EQI 1331 |
| rotor position sensor, absolute detectable revolutions | 4096 |
| Rotor position encoder interface | EnDat 22 |
| Rotor position sensor, encoder measuring principle | Inductive |
| rotor position sensor, DC operating voltage | 5 V |
| rotor position sensor, DC operating voltage range | 3.6 to 14 V |
| rotor position sensor, position values per revolution | 524288 |
| Rotor position transducer resolution | 19 bit |
| rotor position sensor, system accuracy of angle measurement | -65 to 65 arcsec |
| Safety device | Safety device |
| Maximum SIL | Safety integrity level 3, See user documentation |
| Safety sub-functions up to SIL2 | Reliable recording and transmission of single-turn position data |
| Safety sub-functions up to SIL3 | Reliable recording and transmission of single-turn position data, only with additional software function in the servo drive |
| Maximum PL and category | Performance Level e, category 3, See user documentation |
| Safety sub-function up to PL d, category 3 | Reliable recording and transmission of single-turn position data |
| Safety sub-function up to PL e, category 3 | Reliable recording and transmission of single-turn position data, only with additional software function in the servo drive |
| PFHd, subcomponent | 15 x 10 × 10⁻⁹, encoder |
| Duration of use Tm, subcomponent | 20 years, rotor position encoder |
| Mean time to failure (MTTF), subcomponent | 190 years, rotor position encoder |
| Energy efficiency | ENEFF (CN) / Class 1 |
| Manufacturer | Festo |
| Hersteller-Nr | EMMT-AS-190-LKR-HT-R3MY |
| EAN | 4052568592509 |
| Zolltarifnummer | 85015230 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Series | EMMT |
| Protection rating | IP21 |
| Temperature (max.) | 40 |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.







