Images are examples, some edited with AI. The technical data are authoritative. AI notice
Servo motor 680 V, 93.7 Nm standstill torque, multi-turn absolute encoder, holding brake, keyed shaft EMMT-AS-190-LKR-HT-R3MB - Festo 8148412
Servo motor EMMT-AS-190-LKR-HT-R3MB for 680 V DC link voltage with 93.7 Nm standstill torque and up to 183.3 Nm peak torque. A multi-turn absolute encoder with EnDat 22 reports the rotor position at 19 bit. The integrated 24 V holding brake holds 115 Nm at standstill.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
For positioning drives at 680 V, the servo motor EMMT-AS-190-LKR-HT-R3MB offers 82.4 Nm continuous nominal torque and peaks up to 183.3 Nm.
Benefits
- Reserve for acceleration: peak torque 183.3 Nm at 82.4 Nm nominal torque
- Multi-turn absolute encoder: EnDat 22, 19 bit, 4096 revolutions absolute
- Holding brake: 115 Nm holding torque, operating voltage 24 V DC
- Connection: hybrid plug M40x1, 15 pins
- Degree of protection: IP21 at the shaft, IP67 for housing and connection components
- Bearing service life: 20000 h under nominal conditions
Applications
It is used in electric drives for assembly, handling and packaging at ambient temperatures of -15 to 40 °C. Temperature class F to EN 60034-1 and rating class S1 permit continuous duty at 82.4 Nm.
Technical data
| Ambient temperature | -15 to 40 °C |
|---|---|
| Note on ambient temperature | Up to 80°C with derating of -1.5% per degree Celsius |
| Maximum installation height | 4000 m |
| Note on maximum installation height | As of 1,000 m: only with derating of -1.0% per 100 m |
| Storage temperature | -20 to 70 °C |
| Relative air humidity | 0 - 90% |
| Conforms to standard | IEC 60034 |
| Temperature class as per EN 60034-1 | F |
| Maximum winding temperature | 155 °C |
| Rating class as per EN 60034-1 | S1 |
| Temperature monitoring | Digital motor temperature transmission via EnDat 2.2 |
| Motor type to EN 60034-7 | IM V1, IM V3 |
| Mounting position | Any |
| Degree of protection | IP21 |
| Note on degree of protection | IP67 for motor housing including connection components |
| Concentricity, coaxiality, axial runout to DIN SPEC 42955 | N |
| Balance quality | G 2.5 |
| Detent torque | below 1.0% of peak torque |
| Bearing lifetime under nominal conditions | 20000 h |
| Featherkey shaft type | DIN 6885, A 10 x 8 x 45 |
| Interface code, motor out | 190B |
| Electrical connection 1, connection type | Hybrid plug |
| Electrical connection 1, connector system | M40x1 |
| Electrical connection 1, number of connections/cores | 15 |
| Pollution degree | 2 |
| Note on materials | RoHS compliant |
| Corrosion resistance class CRC | 0 - No corrosion stress |
| LABS (PWIS) conformity | VDMA24364 zone III |
| Vibration resistance | As per EN 60068-2-6 |
| Shock resistance | As per EN 60068-2-29, 15 g/11 ms to EN 60068-2-27 |
| Approval | c UL us - Recognised (Oil) |
| CE mark (see declaration of conformity) | To EU EMC Directive, To EU Low Voltage Directive, In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK RoHS instructions, To UK regulations for electrical equipment |
| Certificate issuing authority | UL E342973 |
| Nominal operating voltage DC | 680 V |
| Type of winding switch | Star inside |
| Number of pole pairs | 5 |
| Standstill torque | 93.7 Nm |
| Nominal torque | 82.4 Nm |
| Peak torque | 183.3 Nm |
| Nominal rotary speed | 1000 1/min |
| Maximum rotational speed | 1654 1/min |
| Maximum mechanical speed | 8000 1/min |
| Angular acceleration | 100000 rad/s² |
| Nominal power rating of motor | 8629 W |
| Continuous stall current | 22.8 A |
| Nominal motor current | 20 A |
| Peak current | 49.7 A |
| Motor constant | 4.12 Nm/A |
| Standstill torque constant | 4.79 Nm/A |
| Voltage constant, phase-to-phase | 289.7 mVmin |
| Phase-phase winding resistance | 0.358 Ohm |
| Phase-phase winding inductance | 13.8 mH |
| Winding longitudinal inductivity Ld (phase) | 6.95 mH |
| Winding cross inductivity Lq (phase) | 6.9 mH |
| Electric time constant | 38.8 ms |
| Thermal time constant | 80 min |
| Thermal resistance | 0.3 K/W |
| Measuring flange | 450 x 450 x 30 mm, steel |
| Total mass moment of inertia of output | 195 kgcm² |
| Product weight | 61500 g |
| Permissible axial shaft load | 520 N |
| Permissible radial shaft load | 2620 N |
| Rotor position sensor | Absolute encoder, multi-turn |
| rotor position sensor, manufacturer designation | EQI 1331 |
| rotor position sensor, absolute detectable revolutions | 4096 |
| Rotor position encoder interface | EnDat 22 |
| Rotor position sensor, encoder measuring principle | Inductive |
| rotor position sensor, DC operating voltage | 5 V |
| rotor position sensor, DC operating voltage range | 3.6 to 14 V |
| rotor position sensor, position values per revolution | 524288 |
| Rotor position transducer resolution | 19 bit |
| rotor position sensor, system accuracy of angle measurement | -65 to 65 arcsec |
| Brake holding torque | 115 Nm |
| Operating voltage DC for brake | 24 V |
| Brake current consumption | 2.08 A |
| Power consumption, brake | 50 W |
| Brake separation time | 190 ms |
| Brake closing time | 65 ms |
| DC brake response delay | 12 ms |
| Maximum brake no-load speed | 8000 1/min |
| Maximum friction per braking process | 62000 J |
| Number of emergency stops per hour | 1 |
| Total brake friction | 13000 kJ |
| Mass moment of inertia of brake | 50 kgcm² |
| Switching cycles holding brake | 5 million idle actuations (without friction work) |
| Mean time to failure (MTTF), subcomponent | 190 years, rotor position encoder |
| Energy efficiency | ENEFF (CN) / Class 1 |
| Manufacturer | Festo |
| Hersteller-Nr | EMMT-AS-190-LKR-HT-R3MB |
| EAN | 4052568592523 |
| Zolltarifnummer | 85015230 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Series | EMMT |
| Protection rating | IP21 |
| Temperature (max.) | 40 |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.







