Images are examples, some edited with AI. The technical data are authoritative. AI notice

Stepper motor 48 V, 1.05 Nm holding torque, single-turn absolute encoder EMMB-ST-57-M-SS - Festo 8156138

Festo ✓ Original product Brand new

Stepper motor EMMB-ST-57-M-SS for 48 V DC link voltage with 1.05 Nm holding torque and up to 1.1 Nm peak torque. An integrated single-turn absolute encoder with BiSS-C handles position control. Degree of protection IP20. It is connected via a hybrid plug with connection pattern L10 with 14 pins.

Net
€214.61
excl. VAT
Item FES-8156138
Manufacturer no. EMMB-ST-57-M-SS
Question about this item
  • Specialist dealer since 2009
  • Invoice payment for regular customers
  • Worldwide shipping
  • Technical questions clarified with the manufacturer

Description

For positioning drives at 48 V, the stepper motor EMMB-ST-57-M-SS offers 0.77 Nm continuous nominal torque and peaks up to 1.1 Nm.

Benefits

  • Reserve for acceleration: peak torque 1.1 Nm at 0.77 Nm nominal torque
  • Single-turn absolute encoder: BiSS-C, 16 bit
  • Connection: hybrid plug with connection pattern L10, 14 pins
  • Step angle: 1.8° at full step
  • Mass moment of inertia: 0.3 kgcm² total at output

Applications

The motor suits linear and rotary axes with interface code 57A. Temperature class B to EN 60034-1 and rating class S1 permit continuous duty at 0.77 Nm.

Technical data

Ambient temperature-15 to 40 °C
Note on ambient temperatureUp to 80°C with derating -2%/°C
Maximum installation height4000 m
Note on maximum installation heightAs of 1,000 m: only with derating of -1.0% per 100 m
Storage temperature-20 to 70 °C
Relative air humidityNon-condensing
Conforms to standardIEC 60034
Temperature class as per EN 60034-1B
Maximum winding temperature130 °C
Rating class as per EN 60034-1S1
Motor type to EN 60034-7IM V1, IM V3
Mounting positionAny
Degree of protectionIP20
Note on degree of protectionIP40 motor shaft
Interface code, motor out57A
Electrical connection 1, connection typeHybrid plug
Electrical connection 1, connector systemConnection pattern L10
Electrical connection 1, number of connections/cores14
Note on materialsRoHS compliant
Corrosion resistance class CRC0 - No corrosion stress
LABS (PWIS) conformityVDMA24364 zone III
Vibration resistanceTransport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
Shock resistanceShock test with severity level 2 to FN 942017-5 and EN 60068-2-27
ApprovalRCM, c UL us - Recognised (Oil)
CE mark (see declaration of conformity)To EU EMC Directive, In accordance with EU RoHS Directive
UKCA marking (see declaration of conformity)To UK RoHS instructions
Certificate issuing authorityUL E342973
Nominal operating voltage DC48 V
Number of pole pairs50
Motor holding torque1.05 Nm
Nominal torque0.77 Nm
Peak torque1.1 Nm
Nominal rotary speed1000 1/min
Maximum rotational speed2600 1/min
Maximum mechanical speed8000 1/min
Stepper angle for complete step1.8 deg
Stepping angle tolerance±5%
Nominal power rating of motor81 W
Continuous stall current6.1 A
Nominal motor current5.1 A
Peak current8 A
Motor constant0.152 Nm/A
Voltage constant, phase13.1 mVmin
Phase winding resistance0.17 Ohm
Phase winding inductance0.5 mH
Winding longitudinal inductivity Ld (phase)0.7 mH
Winding cross inductivity Lq (phase)0.5 mH
Electric time constant2.9 ms
Thermal time constant28 min
Thermal resistance1.6 K/W
Measuring flange200 x 200 x 15 mm, steel
Total mass moment of inertia of output0.3 kgcm²
Product weight810 g
Permissible axial shaft load15 N
Permissible radial shaft load75 N
Rotor position sensorAbsolute encoder, single turn
rotor position sensor, manufacturer designationFesto iC-MHM
rotor position sensor, absolute detectable revolutions1
Rotor position encoder interfaceBiSS-C
Rotor position sensor, encoder measuring principlemagnetic
rotor position sensor, DC operating voltage5 V
rotor position sensor, DC operating voltage range4.75 to 5.25 V
Rotor position encoder, sine/cosine periods per revolution2
rotor position sensor, position values per revolution65536
Rotor position transducer resolution16 bit
rotor position sensor, system accuracy of angle measurement-540 to 540 arcsec
Mean time to failure (MTTF), subcomponent106 years, rotor position encoder
Weight0.95 kg
ManufacturerFesto
Hersteller-NrEMMB-ST-57-M-SS
EAN4052568639266
Zolltarifnummer85015100
GPSR HerstellerdatenFesto Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com
ArtikelzustandNew
Artikel-AuthentizitätOriginal product
Operating voltage48 V DC
Protection ratingIP20
Temperature (max.)40

Downloads

Questions about this item

Any other question?

Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.

Customers Who Bought This Item Also Bought