Images are examples, some edited with AI. The technical data are authoritative. AI notice

Toothed belt axis unit with toothed belt, size 35, stroke 100 mm, IO-Link ELGE-TB-35-100-0H-ST-M-H1-PLK-AA-AT-FR - Festo 8083931

Festo ✓ Original product Brand new

Toothed belt axis unit with integrated stepper motor, encoder and controller: 100 mm stroke, up to 50 N feed force and ±0.1 mm repetition accuracy. The ELGE-35 is controlled via digital I/O or IO-Link, so no separate motor controller is needed.

Net
€1,126.22
excl. VAT
Item FES-8083931
Manufacturer no. ELGE-TB-35-100-0H-ST-M-H1-PLK-AA-AT-FR
Question about this item
  • Specialist dealer since 2009
  • Invoice payment for regular customers
  • Worldwide shipping
  • Technical questions clarified with the manufacturer

Description

100 mm stroke, 50 N feed force and ±0.1 mm repetition accuracy: the ELGE-TB-35-100-0H-ST-M-H1-PLK-AA-AT-FR is a toothed belt axis unit with toothed belt that already contains motor, encoder and controller. It is suited to fast transfer and repositioning movements.

Benefits

  • Compact integration: motor, encoder and controller of the ELGE-35 in one unit, connected via M12 plugs for 24 V DC and logic.
  • Two ways to control: the ELGE-35 runs via IO-Link Device V 1.1 or 2 digital inputs (PNP), just like a pneumatic cylinder with a valve.
  • Repeatable: ±0.1 mm at up to 0.72 m/s and 8.5 m/s² acceleration.
  • Guided load capacity: recirculating ball bearing guide for transverse forces Fy up to 50 N and torques My up to 8 Nm, payload up to 2.8 kg horizontal.
  • Low maintenance: lifetime lubrication and 5000 km reference service life, degree of protection IP20.

Applications

In assembly and handling systems the ELGE-35 replaces pneumatic cylinders where intermediate positions or adjustable forces are needed. The axis is intended for horizontal installation, the feed constant is 58 mm/rev. The ELGE-35 is rated for 0 to 50 °C ambient temperature, with 2 % power reduction per K above 30 °C.

Technical data

Effective diameter of drive pinion18.46 mm
Working stroke100 mm
Size35
Toothed-belt stretch0.094 %
Toothed-belt pitch2 mm
Mounting positionHorizontal
GuideRecirculating ball bearing guide
DesignWith toothed belt, With integrated drive
Type of motorStepper motor
Position detectionMotor encoder, Via proximity switch
ReferencingPositive fixed stop block, Negative fixed stop block
Rotor position sensorAbsolute encoder, single turn
Rotor position sensor, encoder measuring principlemagnetic
Temperature monitoringSwitch-off for excessive temperature, Integrated precise CMOS temperature sensor with analogue output
Additional functionsUser interface, Built-in end-position sensing
DisplayLED
Ready status indicationLED
Maximum acceleration8.5 m/s²
Maximum speed0.72 m/s
Speed "Speed press"0.024 m/s
Repetition accuracy±0.1 mm
Features of digital logic outputsConfigurable, Not galvanically isolated
Duty cycle100%
Insulation protection classB
Maximum current digital logic outputs100 mA
Maximum current consumption5300 mA
Maximum current consumption, logic0.3 A
Nominal voltage DC24 V
Nominal current5.3 A
Parameterisation interfaceIO-Link, User interface
Rotor position transducer resolution16 bit
Permissible voltage fluctuations+/- 15 %
Power supply, connection typePlug
power supply, connection systemM12x1, T-coded according to EN 61076-2-111
Power supply, number of pins/wires4
ApprovalRCM
KC markKC-EMV
CE mark (see declaration of conformity)To EU EMC Directive, In accordance with EU RoHS Directive
UKCA marking (see declaration of conformity)To UK instructions for EMC, To UK RoHS instructions
Vibration resistanceTransport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
Shock resistanceShock test with severity level 2 to FN 942017-5 and EN 60068-2-27
LABS (PWIS) conformityVDMA24364 zone III
Storage temperature-20 to 60 °C
Relative air humidity0 - 90%
Degree of protectionIP20
Protection classIII
Ambient temperature0 to 50 °C
Note on ambient temperaturePower must be reduced by 2% per K at ambient temperatures above 30°C
2nd moment of area Iy3770 mm⁴
2nd moment of area Iz4190 mm⁴
Maximum force Fy50 N
Maximum force Fz50 N
Maximum moment Mx2.5 Nm
Maximum moment My8 Nm
Maximum moment Mz8 Nm
Maximum feed force Fx50 N
Reference value effective load, horizontal2.8 kg
Feed constant58 mm/rev
Reference service life5000 km
Maintenance intervalLifetime lubrication
Additional moving mass per 10 mm stroke0.31 g
Product weight2740 g
Number of digital logic outputs 24 V DC2
Number of digital logic inputs2
Specification logic inputBased on IEC 61131-2, type 1
Working range of logic input24 V
IO-Link, SIO-Mode supportYes
Features of logic inputConfigurable, Not galvanically isolated
IO-Link, Protocol versionDevice V 1.1
IO-Link, communication modeCOM3 (230.4 kBaud)
IO-Link, Port classA
IO-Link, Number of portsDevice 1
IO-Link, Process data length OUT2 bytes
IO-Link, Process data content OUTMove in 1 bit, Move out 1 bit, Quit Error 1 bit, Move intermediate 1 bit
IO-Link, Process data length IN2 bytes
IO-Link, Process data content INState Device 1 bit, State In 1 bit, State Intermediate 1 bit, State Move 1 bit, State Out 1 bit
IO-Link, Service data IN32 bit Force, 32 bit position, 32 bit speed
IO-Link, Min, cycle time1 ms
IO-Link, Data storage required500 byte
Maximum cable length15 m outputs, 15 m inputs, 20 m with IO-Link operation
Switching logic for outputsPNP (positive switching)
Switching logic for inputsPNP (positive switching)
IO-Link, connection technologyPlug
Logic interface, connection typePlug
Logic interface, connection technologyM12x1, A-coded according to EN 61076-2-101
Logic interface, number of pins/wires8
Type of mountingProfile mounting
Material profileAnodised wrought aluminium alloy
Note on materialsRoHS compliant
Material drive coverAnodised wrought aluminium alloy
Material pulleysHigh-alloy stainless steel
Material slideAnodised wrought aluminium alloy
Material toothed belt clamping pieceBeryllium copper
Material toothed beltPolychloroprene with glass filament and nylon coating
Weight2.6 kg
ManufacturerFesto
Hersteller-NrELGE-TB-35-100-0H-ST-M-H1-PLK-AA-AT-FR
EAN4052568458140
Zolltarifnummer84798997
GPSR HerstellerdatenFesto Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com
ArtikelzustandNew
Artikel-AuthentizitätOriginal product
Stroke [mm]100
Operating voltage24 V DC
Protection ratingIP20
Temperaturbereich0-50 °C
Temperature (max.)50

Downloads

Questions about this item

Any other question?

Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.

Customers Who Bought This Item Also Bought