Images are examples, some edited with AI. The technical data are authoritative. AI notice

Ball screw axis stroke 1000 mm pitch 5 mm ELGD-BS-KF-WD-100-1000-0H-5P-L - Festo 8192319

Festo ✓ Original product Brand new

With a 1000 mm stroke and ±0.01 mm repeatability, the ball screw axis ELGD-BS-KF-WD-100-1000-0H-5P-L handles exact positioning tasks. Ball screw with 5 mm pitch, feed force up to 1100 N and travel speed up to 0.07 m/s. Suitable for stepper and servo motors, degree of protection IP40.

Net
€1,620.03
excl. VAT
Item FES-8192319
Manufacturer no. ELGD-BS-KF-WD-100-1000-0H-5P-L
Question about this item
  • Specialist dealer since 2009
  • Invoice payment for regular customers
  • Worldwide shipping
  • Technical questions clarified with the manufacturer

Description

The Festo ball screw axis ELGD-BS-KF-WD-100-1000-0H-5P-L at a glance: 1000 mm stroke, size 100, up to 0.07 m/s. The ball screw with 5 mm/rev pitch converts motor torque into up to 1100 N feed force, while the recirculating ball bearing guide carries transverse forces up to 4400 N.

Advantages

  • Repeatability of ±0.01 mm over the full 1000 mm stroke.
  • Feed force up to 1100 N in the direction of motion.
  • Short cycles with up to 0.07 m/s and 15 m/s².
  • Transverse forces up to 4400 N and moments up to 140 Nm via the recirculating ball bearing guide.
  • Lifetime lubrication, reference service life 5000 km.
  • Cleanroom class 7 to ISO 14644-1 (extraction: class 4).

Application

Typical tasks for the ball screw axis ELGD-BS-KF-WD-100-1000-0H-5P-L are gantries, feeders and test stations needing an exact target position over 1000 mm. Mounting position any, ambient temperature 0 to 60 °C. Designed for mounting stepper and servo motors.

Technical data

TypeELGD-BS-KF-WD-100-1000-0H-5P-L
Working stroke1000 mm
Size100
Stroke reserve0 mm
Ball screw reversing backlash±0.02 mm
Spindle diameter10 mm
Spindle pitch5 mm/U
Mounting positionAny
GuideRecirculating ball bearing guide
DesignWith ball screw
Type of motorStepper motor, servo motor
Spindle typeBall screw
Functional principle of measuring systemIncremental
Position detectionFor inductive sensors
Maximum acceleration15 m/s²
Maximum rotational speed835 1/min
Maximum speed0.07 m/s
Repetition accuracy±0.01 mm
Duty cycle100%
LABS (PWIS) conformityVDMA24364-C1-L
Suitability for the production of Li-ion batteriesSuitable for battery production with reduced Cu/Zn/Ni values (F1a)
Cleanroom suitability, measured according to ISO 14644-14Class 4 according to ISO 14644-1 (with vacuum extraction), class 7 according to ISO 14644-1
Storage temperature-20 to 60 °C
Degree of protectionIP40
Ambient temperature0 to 60 °C
Impact energy in end positions0.001 J
Note on the impact energy in the end positionsAt maximum homing speed of 0.01 m/s
2nd moment of area Iy347100 mm⁴
2nd moment of area Iz2268000 mm⁴
Idle torque at vmax0.14 Nm
Idle torque at vmin0.06 Nm
Maximum force Fy4400 N
Maximum force Fz4400 N
Maximum force Fy total axis4092 N
Maximum force Fz total axis2250 N
Fy at theoretical life value of 100 km (only guide consideration)18415 N
Fz at theoretical life value of 100 km (only guide consideration)18415 N
Maximum moment Mx140 Nm
Maximum moment My230 Nm
Maximum moment Mz220 Nm
Maximum moment Mx total axis160 Nm
Maximum moment My total axis191 Nm
Maximum moment Mz total axis191 Nm
Mx at theoretical life value of 100 km (only guide consideration)645 Nm
My at theoretical life value of 100 km (only guide consideration)720 Nm
Mz at theoretical life value of 100 km (only guide consideration)720 Nm
Distance between slide surface and guide centre47 mm
Maximum radial force at drive shaft180 N
Maximum feed force Fx1100 N
Torsional mass moment of inertia It108900 mm⁴
Mass moment of inertia JH per metre of stroke0.07554 kgcm²
Mass moment of inertia JL per kg of working load0.00633 kgcm²
Mass moment of inertia JO0.05632 kgcm²
Feed constant5 mm/U
Reference service life5000 km
Maintenance intervalLifetime lubrication
Moving mass1290 g
Product weight8879 g
Basic weight for 0 mm stroke2979 g
Additional weight per 10 mm stroke59 g
Dynamic deflection (moving load)0.05% of the axis length, maximum 0.5 mm
Static deflection (load in standstill)0.1% of the axis length
Interface code, actuatorT42
Material end capAluminium gravity die-cast, painted
Material profileAnodised wrought aluminium alloy
Note on materialsRoHS compliant
Material cover tapeHigh-alloy stainless steel
Material drive coverAluminium gravity die-cast, painted
Material guide slideSteel
Material guide railSteel
Material slideWrought aluminium alloy
Material ball screw nutSteel
Material spindleSteel
ManufacturerFesto
Hersteller-NrELGD-BS-KF-WD-100-1000-0H-5P-L
EAN4052568775780
Zolltarifnummer84799070
GPSR HerstellerdatenFesto Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com
ArtikelzustandNew
Artikel-AuthentizitätOriginal product
Stroke [mm]1000
Housing materialAluminium, anodised
Protection ratingIP40
Temperaturbereich0-60 °C
Temperature (max.)60

Downloads

Questions about this item

Any other question?

Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.

Customers Who Bought This Item Also Bought