Pressure switch, -1 to 0 bar, polycarbonate, overpressure safety 2 bar, protection IP 40

The pressure switch converts the applied pressure into an electrical signal for control or signalling. The setting range covers -1 to 0 bar. The material used is polycarbonate. The overpressure safety amounts to 2 bar. The temperature range extends over -20 to +70 °C.

Benefits

• Setting range -1 to 0 bar as the leading rating of the device
• Overpressure safety 2 bar, so the load limit is clearly stated
• Temperature range -20 to +70 °C for use in the workshop and in the plant
• Degree of protection IP 40 against dust and moisture at the installation point
• Material polycarbonate determines strength and resistance of the part
• Released for compressed air, non-aggressive gases, vacuum

Applications

Compressor controls, pump monitoring, hydraulic power units and limit signalling in machines.