PVC-U ball valve, electric actuator, DN 40, female thread, FKM, standard actuator, 24-240 V

Once installed, the ball valve shuts off the flow under electric remote control and releases it again. The article is listed with a flow rate of 1700 l/min. This version is listed with nominal size DN 40 and an installation length of 130 mm. Material PVC-U is listed for this version. Also stated are the female thread connection and seals in FKM.

Benefits

• Electric quarter-turn actuator with an operating time of 9 s, manual override and visual position indicator.
• Flow rate 1700 l/min at nominal size DN 40.
• Pressure range 0 - 16 bar with FKM seals and a PTFE ball seat.
• Voltage range 24 to 240 V (AC/DC), the actuator runs on DC or AC supply.
• Installation length 130 mm with female thread connection, two additional limit switches and torque cut-off are built in.

Applications

In industry the actuator with its 9 s operating time opens and closes the line from the control system, and the manual override stays accessible without removing the cover.