Adjustable elbow male stud coupling, M 48x2-38 S, zinc-plated steel, no nut/ring

Once installed, the adjustable elbow male stud coupling turns the tube through a right angle and can be set to the required direction. Material zinc-plated steel, no nut/ring is listed for this version. The data state a working pressure of 315 bar. Also stated are the M 48x2 male stud thread and the heavy series.

Benefits

• Male stud thread M 48x2 with a sealing cone, freely adjustable in direction, for tube 38 S (M52x2).
• Working pressure up to 315 bar as per the data sheet.
• Temperature range -35 to +100 °C for material zinc-plated steel, no nut/ring.
• Built in the heavy series with a cutting ring and a union nut.
• A lock nut and a seal hold the direction once it has been set.

Applications

On control and valve blocks the heavy series takes tube 38 S (M52x2) around the corner over -35 to +100 °C.