Adjustable elbow male stud coupling, M 16x1,5-10 S, zinc-plated steel, no nut/ring

Once installed, the adjustable elbow male stud coupling turns the tube through a right angle and can be set to the required direction. It is produced from zinc-plated steel, no nut/ring. The data give a tube diameter of 10 S (M18x1.5). In addition the data give the M 16x1.5 male stud thread and the heavy series.

Benefits

• Male stud thread M 16x1,5 with a sealing cone, freely adjustable in direction, for tube 10 S (M18x1.5).
• Working pressure up to 630 bar as per the data sheet.
• Temperature range -35 to +100 °C for material zinc-plated steel, no nut/ring.
• Built in the heavy series with a cutting ring and a union nut.
• A lock nut and a seal hold the direction once it has been set.

Applications

In tight installation spaces the line 10 S (M18x1.5) is turned through M 16x1,5 and set to the required direction.