Adjustable T connector with cone, tube 15 L, stainless steel 1.4571

In use, the adjustable T connector splits a line into two paths and joins the tube to a tube stud with a sealing cone and an O-ring. The data also state a temperature range of -20 to +200 °C. Decisive for the selection is a working pressure of 315 bar. In addition the data give light series.

Benefits

• The tee branches the line off without needing a second port on the device.
• The branch can be set to any direction before it is locked, so tube 15 L (M22x1,5) stays free of stress.
• Sealing cone with an O-ring at tube stud 15 L for a soft joint that can be undone repeatedly.
• Working pressure up to 315 bar in the light series.
• Temperature range -20 to +200 °C for the body in stainless steel 1.4571.

Technical data

Applications

For a gauge take-off the tee is set into line 15 L (M22x1,5) while the main line stays continuous.

Standards and conformity

The stated temperature range -20 to +200 °C applies to the version in stainless steel 1.4571. An elastomer seal narrows it.