Adjustable T connector, tube 12 S, stainless steel 1.4571, no nut or ring

As a adjustable T connector the article branches a second line off a tube stud and takes the tube through a cutting ring. The data sheet gives a working pressure of 630 bar. This version is listed with tube stud 12 S and tube connection 12 S (M20x1.5). Material stainless steel 1.4571 is listed for this version. Also stated are heavy series and scope of delivery without nut and cutting ring.

Benefits

• The branch can point in any direction before it is locked, so tube 12 S (M20x1,5) can be laid without rework.
• Tube stud 12 S and tube connection 12 S (M20x1,5) in the same size.
• Working pressure up to 630 bar in the heavy series.
• Temperature range -60 to +400 °C for the body in stainless steel 1.4571.
• When tightened the cutting ring bites into the tube, so no extra seal is needed.

Applications

In a hydraulic line 12 S (M20x1,5) the tee sets the branch for a second consumer without cutting the main line.

Standards and conformity

The stated temperature range -60 to +400 °C applies to the version in stainless steel 1.4571. An elastomer seal narrows it.