Adjustable male stud tee, M 12x1.5, tube 6 S, zinc-plated steel, no nut or ring

In use, the adjustable male stud tee connects a precision tube to a metric male stud thread and branches off an adjustable third path. It is supplied with male stud thread M 12x1.5 and tube connection 6 S (M14x1.5). It is produced from zinc-plated steel. In addition the data give heavy series and scope of delivery without nut and cutting ring.

Benefits

• The branch can be turned to any direction before it is locked, so tube 6 S (M14x1,5) follows the existing route.
• Metric male stud thread M 12x1.5 with an elastomer seal for a direct connection at the device.
• Working pressure up to 630 bar in the heavy series.
• Temperature range -35 to +100 °C for the body in zinc-plated steel.
• Tube connection 6 S (M14x1,5) through a cutting ring, with no extra seal at the tube.

Applications

At a valve block with thread M 12x1.5 the tee branches the second circuit off in the direction that the installation demands.

Standards and conformity

The stated temperature range -35 to +100 °C applies to the version in zinc-plated steel. An elastomer seal narrows it.