Adjustable cutting ring fitting, thread M 22x1.5, tube stud 16 S, zinc plated steel, 400 bar

This adjustable cutting ring fitting is designed for the male thread M 22x1.5 and a tube stud 16 S. The part clamps the cutting ring onto the tube and seals metal to metal. The operating pressure reaches up to 400 bar.

Benefits

• With tube stud 16 S the size is fixed, so no reworking of the line is required
• The operating pressure up to 400 bar is released for this size
• The temperature range from -35 °C to +100 °C covers cold installation and warm machine surroundings
• Zinc plated steel carries the load of the joint in the range from -35 °C to +100 °C
• The heavy series with the code S follows the dimension series to ISO 8434-1

Applications

Hydraulic lines in machine and plant engineering, pipework on presses and pumps, repair of existing tube fittings, test benches and power unit construction.

Standards and conformity

The tube fitting follows the design of cutting ring tube fittings to ISO 8434-1, formerly DIN 2353.