Images are examples, some edited with AI. The technical data are authoritative. AI notice
Electric parallel gripper size 16, stroke per jaw 10 mm, IO-Link EHPS-16-A-LK - Festo 8103809
With 154 N total gripping force, the parallel gripper EHPS-16-A-LK grips electrically without compressed air. 10 mm stroke per jaw, repetition accuracy 0.03 mm, plain-bearing guide. Supplied with 24 V DC, degree of protection IP40.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
Size 16, 154 N total gripping force: the EHPS-16-A-LK is a Festo parallel gripper. An electric motor moves both jaws in parallel. Version EHPS-16-A-LK: plain-bearing guide, rack and pinion.
Benefits
- 154 N total gripping force
- Repetition accuracy 0.03 mm, replacement accuracy 0.2 mm
- 10 mm stroke per jaw, with max. 100 g per external gripper finger
- IO-Link device V 1.1 with gripping position, gripping force and gripping mode as process data
- Cycle frequency up to 1.1 Hz, current consumption max. 1000 mA
- Corrosion resistance class CRC 1, ambient temperature 5 to 60 °C
Applications
The EHPS-16-A-LK suits handling tasks without a compressed air supply and applications where the controller sets gripping position and gripping force. Gripper fingers are mounted on the jaws, each external finger may weigh up to 100 g. Gripping position readable via integrated displacement encoder and IO-Link. Shipping weight 0.48 kg.
Technical data
| Size | 16 |
|---|---|
| Stroke per gripper jaw | 10 mm |
| Max. replacement accuracy | 0.2 mm |
| Max. angular gripper jaw backlash ax, ay | 0.4° |
| Max. gripper jaw backlash Sz | 0.05 mm |
| Rotational symmetry | 0.2 mm |
| Repetition accuracy, gripper | 0.03 mm |
| Number of gripper jaws | 2 |
| Drive system | Electrical |
| Mounting position | Any |
| Gripper function | Parallel |
| Design | Worm gear unit, T-shape, Rack and pinion, Electric gripper |
| Conforms to standard | IEC 61010-1 |
| Guide | Plain-bearing guide |
| Position detection | With Hall sensor, Via integrated displacement encoder, Via IO-Link® interface |
| Type of motor | DC servo motor |
| Ready status indication | LED |
| Max. cycle frequency | 1.1 Hz |
| Max. mass per external gripper finger | 100 g |
| Max. current consumption | 1000 mA |
| Nominal operating voltage DC | 24 V |
| Permissible voltage fluctuations | ±10% |
| Approval | RCM |
| KC mark | KC-EMV |
| CE mark (see declaration of conformity) | To EU EMC Directive, In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK RoHS instructions |
| Explosion protection certification outside the EU | EPL Gb (GB) |
| Explosion protection | Zone 1 (UKEX), Zone 21 (UKEX) |
| Corrosion resistance class CRC | 1 - Low corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B2-L |
| Suitability for the production of Li-ion batteries | Copper content max. 5 % by mass (except PCBs, cables, connectors and coils) |
| Sound pressure level | 70 dB(A) |
| Degree of protection | IP40 |
| Ambient temperature | 5 to 60 °C |
| Total gripping force | 154 N |
| Mass moment of inertia | 0.78 kgcm² |
| Max. force on gripper jaw Fz static | 200 N |
| Max. torque at gripper Mx static | 7 Nm |
| Max. torque at gripper My static | 4.4 Nm |
| Max. torque at gripper Mz static | 7 Nm |
| Lubrication interval for guide components | 2 million cycles |
| Product weight | 296 g |
| Protocol | IO-Link® |
| IO-Link, Protocol version | Device V 1.1 |
| IO-Link, communication mode | COM3 (230.4 kBaud) |
| IO-Link, SIO-Mode support | No |
| IO-Link, Port class | Device B |
| IO-Link, Number of ports | Device 1 |
| IO-Link, Process data length OUT | 8 bytes |
| IO-Link, Process data content OUT | 16 bit (ControlWord), 16 bit (GrippingPosition), 8 bit (GrippingForce), 8 bit (GrippingMode), 8 bit (GrippingTolerance), 8 bit (WorkpieceNo) |
| IO-Link, Process data length IN | 6 bytes |
| IO-Link, Process data content IN | 16 bit (ActualPosition), 16 bit (ErrorNumber), 16 bit (StatusWord) |
| IO-Link, Min. cycle time | 5 ms |
| IO-Link, Data storage required | 500 byte |
| IO-Link, Device ID | 0x000031 |
| Electrical connection | 5-pin, Cable with plug, M12x1 |
| Type of mounting | Via female thread and centring sleeve, Via through-hole and centring sleeve |
| Note on materials | RoHS compliant |
| Housing material | Anodised wrought aluminium alloy |
| Gripper jaw material | High-alloy stainless steel |
| Weight | 0.48 kg |
| Manufacturer | Festo |
| Hersteller-Nr | EHPS-16-A-LK |
| EAN | 4052568458867 |
| Zolltarifnummer | 84798997 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Aluminium |
| Actuation type | Electrical |
| Operating voltage | 24 V DC |
| Protection rating | IP40 |
| Temperaturbereich | 5-60 °C |
| Temperature (max.) | 60 |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.







