Images are examples, some edited with AI. The technical data are authoritative. AI notice

Mini slide unit with ball screw, size 45, stroke 150 mm, IO-Link EGSS-BS-KF-45-150-10P-ST-M-H1-PLK-AA - Festo 8083819

Festo ✓ Original product Brand new

For stroke and infeed movements with the load mounted directly: the EGSS with ball screw comes with motor, absolute encoder and controller on board. 150 mm stroke, up to 0.25 m/s and a payload of up to 6 kg horizontal and 6 kg vertical, commissioning via IO-Link or directly on the unit.

Net
€1,261.03
excl. VAT
Item FES-8083819
Manufacturer no. EGSS-BS-KF-45-150-10P-ST-M-H1-PLK-AA
Question about this item
  • Specialist dealer since 2009
  • Invoice payment for regular customers
  • Worldwide shipping
  • Technical questions clarified with the manufacturer

Description

The EGSS-BS-KF-45-150-10P-ST-M-H1-PLK-AA is a ready-to-connect mini slide unit in size 45 with ball screw. Motor, encoder and controller sit inside the unit, so stroke and infeed movements with the load mounted directly need only two plug connections.

Benefits

  • Integrated drive: the EGSS-45 contains stepper motor, encoder with 16 bit resolution and controller, supplied with 24 V DC at 3 A nominal current.
  • Quick commissioning: set end positions and speed of the EGSS-45 on the user interface, then control via 2 digital inputs or IO-Link.
  • Repeatable: ±0.015 mm at up to 0.25 m/s and 5 m/s² acceleration.
  • Guided load capacity: recirculating ball bearing guide for transverse forces Fy up to 1314 N and torques My up to 7.05 Nm, payload up to 6 kg horizontal and 6 kg vertical.
  • Cleanroom-suitable: the EGSS-45 meets Class 9 according to ISO 14644-1, degree of protection IP40, lifetime lubrication with 5000 km reference service life.

Applications

Typical applications for the EGSS-45 with 150 mm stroke are assembly, testing and packaging systems. Loads are mounted directly on the slide, the feed constant is 10 mm/rev. The EGSS-45 is rated for 0 to 50 °C ambient temperature, above 30 °C power must be reduced by 2 % per K.

Technical data

Working stroke150 mm
Size45
Stroke reserve0 mm
Reversing backlash theoretical150 µm
Spindle diameter10 mm
Spindle pitch10 mm/rev
Mounting positionAny
GuideRecirculating ball bearing guide
DesignWith ball screw, With integrated drive
Type of motorStepper motor
ReferencingPositive fixed stop block, Negative fixed stop block
Spindle typeBall screw
Position detectionMotor encoder, Via proximity switch
Rotor position sensorAbsolute encoder, single turn
Rotor position sensor, encoder measuring principlemagnetic
Protective functionTemperature monitoring
Additional functionsBuilt-in end-position sensing
DisplayLED
Ready status indicationLED
Maximum acceleration5 m/s²
Maximum speed0.25 m/s
Speed "Speed press"0.01 m/s
Repetition accuracy±0.015 mm
Features of digital logic outputsConfigurable, Not galvanically isolated
Duty cycle100%
Insulation protection classB
Maximum current digital logic outputs100 mA
Maximum current consumption3000 mA
Maximum current consumption, logic0.3 A
Nominal voltage DC24 V
Nominal current3 A
Parameterisation interfaceIO-Link, User interface
Rotor position transducer resolution16 bit
Permissible voltage fluctuations+/- 15 %
Power supply, connection typePlug
power supply, connection systemM12x1, T-coded according to EN 61076-2-111
Power supply, number of pins/wires4
ApprovalRCM
KC markKC-EMV
CE mark (see declaration of conformity)To EU EMC Directive, In accordance with EU RoHS Directive
UKCA marking (see declaration of conformity)To UK RoHS instructions
Vibration resistanceTransport application test with severity level 1 to FN 942017-4 and EN 60068-2-6
Shock resistanceShock test with severity level 1 to FN 942017-5 and EN 60068-2-27
Corrosion resistance class CRC0 - No corrosion stress
LABS (PWIS) conformityVDMA24364 zone III
Cleanroom suitability, measured according to ISO 14644-14Class 9 according to ISO 14644-1
Storage temperature-20 to 60 °C
Relative air humidity0 - 90%
Degree of protectionIP40
Protection classIII
Ambient temperature0 to 50 °C
Note on ambient temperaturePower must be reduced by 2% per K at ambient temperatures above 30°C
Dynamic basic load rating fixed bearing7413 N
Dynamic basic load rating linear guide3240 N
Dynamic basic load rating ball screw3200 N
Maximum force Fy1314 N
Maximum force Fz1314 N
Fy at theoretical life value of 100 km (only guide consideration)3240 N
Fz at theoretical life value of 100 km (only guide consideration)3240 N
Maximum moment Mx8.14 Nm
Maximum moment My7.05 Nm
Maximum moment Mz7.05 Nm
Mx at theoretical life value of 100 km (only guide consideration)20 Nm
My at theoretical life value of 100 km (only guide consideration)17 Nm
Mz at theoretical life value of 100 km (only guide consideration)17 Nm
Maximum radial force at drive shaft340 N
Maximum feed force Fx120 N
Reference value effective load, horizontal6 kg
Reference value effective load, vertical6 kg
Static basic load rating ball screw5900 N
Static basic load rating linear guide5630 N
Feed constant10 mm/rev
Static basic load rating fixed bearing3966 N
Reference service life5000 km
Maintenance intervalLifetime lubrication
Moving mass for 0 mm stroke212 g
Additional moving mass per 10 mm stroke30 g
Product weight2181 g
Basic weight for 0 mm stroke1238 g
Additional weight per 10 mm stroke63 g
Number of digital logic outputs 24 V DC2
Number of digital logic inputs2
Specification logic inputBased on IEC 61131-2, type 1
Working range of logic input24 V
IO-Link, SIO-Mode supportYes
Features of logic inputConfigurable, Not galvanically isolated
IO-Link, Protocol versionDevice V 1.1
IO-Link, communication modeCOM3 (230.4 kBaud)
IO-Link, Port classA
IO-Link, Number of ports1
IO-Link, Process data length OUT2 bytes
IO-Link, Process data content OUT1 bit (move in), 1 bit (Move out), 1 bit (Quit Error), 1 bit (move intermediate)
IO-Link, Process data length IN2 bytes
IO-Link, Process data content IN1 bit (state device), 1 bit (State Intermediate), 1 bit (State Move), 1 bit (State in), 1 bit (state out)
IO-Link, Service data IN32 bit Force, 32 bit position, 32 bit speed
IO-Link, Min, cycle time1 ms
IO-Link, Data storage required500 byte
Maximum cable length15 m outputs, 15 m inputs, 20 m with IO-Link operation
Switching logic for outputsPNP (positive switching)
Switching logic for inputsPNP (positive switching)
IO-Link, connection technologyPlug
Logic interface, connection typePlug
Logic interface, connection technologyM12x1, A-coded according to EN 61076-2-101
Logic interface, number of pins/wires8
Type of mountingWith female thread, With centring sleeve, With accessories, Via cylindrical dowel pin
Note on materialsRoHS compliant
Material guide slideBearing steel
Material guide railBearing steel
Material housingAnodised wrought aluminium alloy
Material yoke plateAnodised wrought aluminium alloy
Material piston rodHigh-alloy stainless steel
Material slideAnodised wrought aluminium alloy
Material ball screw nutBearing steel
Material spindleBearing steel
Weight2.1 kg
ManufacturerFesto
Hersteller-NrEGSS-BS-KF-45-150-10P-ST-M-H1-PLK-AA
EAN4052568457730
Zolltarifnummer84798997
GPSR HerstellerdatenFesto Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com
ArtikelzustandNew
Artikel-AuthentizitätOriginal product
Stroke [mm]150
Housing materialAluminium, anodised
Operating voltage24 V DC
Protection ratingIP40
Temperaturbereich0-50 °C
Temperature (max.)50

Downloads

Questions about this item

Any other question?

Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.

Customers Who Bought This Item Also Bought