Stainless steel ball valve, direct mounting flange welding end 13.5, PN 63

In daily operation this item shuts off the flow in the line with a quarter turn, and it is supplied as a stainless steel ball valve. The recorded ratings are direct mounting flange to ISO 5211 F04 (square drive 9) and pressure rating PN -0.9 to 63 bar. The material is stainless steel 1.4408. For the seals the data gives PTFE.

Benefits

• full bore in the open position and therefore low pressure loss, verified by direct mounting flange to ISO 5211 F04 (square drive 9)
• material stainless steel 1.4408 as stated in the data
• sealing material PTFE
• temperature range -20 to +180 °C
• made to DIN 3202
• made to EN 12982

Applications

In service the version is found in pipework, compressed air networks and plant construction. For the media the data sheet gives water, oil, compressed air, vacuum, fuels, solvents, aggressive media.

Standards and conformity

Manufacture follows DIN 3202 and EN 12982.