Mist lubricator, G 1/2", aluminium, plastic bowl, double walled, series 4A

Where moving parts need permanent lubrication, this mist lubricator meters the oil straight into the air stream. The temperature range extends over -5 to +60 °C. The connection is made via thread G 1/2". The material used is aluminium. The media provided for are compressed air, neutral gases.

Benefits

• Flow rate 42 - 5500 l/min without any appreciable pressure drop in the line
• Oil reservoir 183 cm³ for long refilling intervals
• Height 217 mm and length 80 mm for installation planning
• Material aluminium determines strength and resistance of the part
• Connection thread G 1/2" for direct installation in the line
• Temperature range -5 to +60 °C for use in the workshop and in the plant

Applications

Air tools, impact wrenches and chisel hammers, pneumatic drives with a high switching frequency.