Pressure switch SYNTESI, size 2, without port bushings, M8 connector, 300 mm cable, type 5620S200 - Riegler 144959

The SYNTESI pressure switch is installed as a module in the service unit and switches within 0.5 to 10 bar. It can be mounted upright or upside down. The hysteresis is fixed at 0.4 to 0.8 bar, the contact is rated 2 A at 250 V.

Benefits

• Switching pressure adjustable 0.5 to 10 bar
• Changeover contact as normally open (NO) or normally closed (NC), max. 2 A at 250 V
• Hysteresis 0.4 to 0.8 bar, fixed
• Protection class IP 65
• Electrical connection: M8 connector on 300 mm cable
• Inlet pressure up to 13 bar

Applications

It is used as a pressure monitor in SYNTESI service units ahead of actuators and valve terminals.