Pressure switch SYNTESI, size 1, without port bushings, M8 connector, 300 mm cable, type 5610S200 - Riegler 144950

The SYNTESI pressure switch is installed as a module in the service unit and switches within 0.5 to 10 bar. It can be mounted upright or upside down. The hysteresis is fixed at 0.4 to 0.8 bar, the contact is rated 2 A at 250 V.

Benefits

• Switching pressure adjustable 0.5 to 10 bar
• Changeover contact as normally open (NO) or normally closed (NC), max. 2 A at 250 V
• Hysteresis 0.4 to 0.8 bar, fixed
• Protection class IP 65
• Electrical connection: M8 connector on 300 mm cable
• Inlet pressure up to 15 bar

Applications

A typical use is monitoring the supply pressure of a machine so the control system stops or warns when pressure is too low.