Pressure switch, G 1/4", 1 - 10 bar, aluminium, overpressure safety 200 bar, B1

The pressure switch converts the applied pressure into an electrical signal for control or signalling. The setting range covers 1 - 10 bar. The connection is made via thread G 1/4". The material used is aluminium. The overpressure safety amounts to 200 bar.

Benefits

• Setting range 1 - 10 bar as the leading rating of the device
• Connection thread G 1/4" for direct installation in the line
• Overpressure safety 200 bar, so the load limit is clearly stated
• Temperature range -20 to +100 °C for use in the workshop and in the plant
• Degree of protection IP 65 against dust and moisture at the installation point
• Switching capacity 250 V / 2 A at the output contact

Applications

Test and control systems, vessel monitoring, dryer and filter monitoring, plant protection.

Standards and conformity

The data sheets refer to DIN 43650, EN 175301-803. Further approvals are not documented and are therefore not stated.