Pressure transmitter, measuring range 0 - 250 bar, 0 - 10 V, angled connector

This pressure transmitter converts the applied pressure into a standard electrical signal for control systems. The data sheet gives a measuring range of 0 - 250 bar. This version is listed with output signal 0 - 10 V and connection through an angled connector. The stated material is stainless steel 1.4404.

Benefits

• Measuring range 0 - 250 bar, overpressure safe up to 500 bar.
• Output signal 0 - 10 V at a supply voltage of 8 to 30 V DC.
• Electrical connection through an angled connector with 4 pins.
• Non-linearity 0,5 % of span (BFSL) and accuracy 1 % of span to IEC 61298-2.
• Wetted parts in 1.4404 at a medium temperature of 0 to +80 °C.

Applications

In machine and plant construction the transmitter reports 0 - 250 bar to the controller as 0 - 10 V.

Standards and conformity

Non-linearity and accuracy are stated to IEC 61298-2. The electrical connection follows DIN 43650 and EN 175301-803 A or DIN EN 61076-2-101.