Throttle valve, throttling in both directions, push-in connector for hose 6 mm, G 1/4 screw-in thread, type 338.014-6 - Riegler 107006

The throttle valve 338.014-6 with throttling in both directions screws straight into the valve or cylinder (G 1/4 screw-in thread) and controls piston speed right there. The small design keeps the space required at the cylinder low. The banjo bolt design allows alignment during assembly, once tightened the valve sits firmly.

Benefits

• Throttling in both directions (B) for speed control.
• Push-in connector for hose 6 mm.
• Mounting with 17 mm width across flats.
• Operating pressure 0 to 10 bar.
• Temperature range -20 to 80 °C.
• Body made of nickel-plated brass, seals made of NBR.

Applications

For cylinders and valves with G 1/4 ports where extend or retract speed needs setting.