Rotary union, female thread G 3/4" to female thread G 1/2", DN 15 mm, -10 to +85 °C

Where a line has to follow a rotary movement, the rotary union prevents the hose from twisting. The female thread G 3/4" and the female thread G 1/2" accept the mating part. The operating pressure is stated as 0.5 to 12 bar. The nominal size comes to 15 mm.

Benefits

• Alignment takes place after screwing in, which saves 1 additional angle piece.
• The operating pressure of 0.5 to 12 bar defines the load limit of the joint.
• The female thread G 3/4" fits the existing port without an adapter.
• Within the range of -10 to +85 °C the joint remains serviceable.
• At 15 mm the nominal size is defined in the data sheet and can be planned in advance.
• The rotatable connection prevents the line from twisting over a full 360 degrees.

Technical data

Applications

Rotatable connections on drums and shafts, swivel arms, hose reels and moving tools. The selection follows the existing port and the operating load of the system.