Rotary union, for vacuum operation, female thread G 3/4" to female thread G 1/2", DN 15 mm

Where a line has to follow a rotary movement, the rotary union prevents the hose from twisting. The female thread G 3/4" and the female thread G 1/2" accept the mating part. The operating pressure is stated as -1 to 0 bar. The nominal size comes to 15 mm.

Benefits

• Alignment takes place after screwing in, which saves 1 additional angle piece.
• The operating pressure of -1 to 0 bar defines the load limit of the joint.
• The female thread G 3/4" fits the existing port without an adapter.
• Within the range of -10 to +85 °C the joint remains serviceable.
• At 15 mm the nominal size is defined in the data sheet and can be planned in advance.
• The rotatable connection prevents the line from twisting over a full 360 degrees.

Applications

Rotatable connections on drums and shafts, swivel arms, hose reels and moving tools. The selection follows the existing port and the operating load of the system.